Removing the Backseat

Easiest way to remove the back seat is take the seat belt buckle and insert it between the bottom of the seat and the carpeted floor. Try to hold the buckle parallel to the ground and NOT at an angle. Insert it about 8 inches from the door seal and then slide it towards the the center of the seat.

You will hit the side of the catch mechanism. Pull the buckle back slightly and move it about an inch further. Push the buckle in and the will release the catch.

Here you can see how the belt will contact the release.

Here you can see how far over the release is.

Same procedure for the other side. You can now lift the seat up.

Done